As the project nears the final stages, work commitments have slowed down the process, i have a few interior parts to finish along with touching up areas in general.
480 miles with minor leaks from the dizzy and tranny pressure fitting on the trans, i have resealed the trans pressure sensor and the leak is now almost stopped, i dont like tightening brass fittings! they tend to strip!
The dizzy is still leaking slightly, i changed the gasket and it seams to be worse under load and higher revs, the next step will be to drill the cover plate whee the mechanical fuel pump should bit and install a vent pipe with breather.
Pics to follow when i have the parts to do this, it will be done inconjunction with the oil change around 500miles.